Long press (1) button for 3 seconds to connect the network.
When the buzzer emit alarm sound, press (1) button to stop alarm.
When the buzzer is silent, press (1) button to change the time of alarm.
One di” sound is 10s alarm
Two “di”sound is 20s alarm
Three “di” sound is 30s alarm
How to connect the network
1. The method of network connection:
A. After turned on the power button, Long press the button for 3 seconds at the first time and then enter EZ network model.
B. Then long press button for 3 seconds to enter the AP network model.
These two modes are replaced circularly.
2. State of LED light.
The state of EZ model：LED flashing (2.5Hz)
The state of AP model：LED flashing (0.5Hz）
3. LED light ’s state for the result of network connection
The whole network connection’s process is up to 180 seconds, it failed to connect after timeout
Failed connection ：LED will be off and exits the state of network connection
Connect succesfully：The LED will be on for 3 seconds before exiting the state of network connection
Function:
When the detector detects the water, it will emit a 130db sound ,the indicator is on for 0.5 seconds and the message will be sent to the phone of owner.
Post time: Mar-16-2020
